|
美国Murphy摩菲LM500-TF油位维持计 自动补油器
Murphy LM500-TF Oil Level Maintainer
Murphy LM500-TF机油油位保持器包括一个测试功能，通过一次按下测试按钮即可确认浮子和开关均正常工作。LM500系列保持发动机、泵或压缩机的曲轴箱油位。调整到正确的运行油位后，它将在使用时补充机油。如果供油中断且设备继续用油，低液位开关将报警和/或关闭设备。Murphy LM500-TF Oil Level Maintainer includes a test feature that confirms both the float and switch are operating correctly with a single press of the test button. The LM500 series maintains the crankcase oil level of an engine, pump or compressor. Adjusted to the correct running-oil-level, it will replenish oil as it is used. The low-level switch will alarm and/or shutdown the equipment if supply oil is lost and the equipment continues to use oil.
产品名称：Murphy LM500-TF Oil Level Maintainer LM500油位维持计
PDF CATALOG
技术资料下载
产品特性:
测试功能（TF选项）：可对浮球及开关的性能进行测试
可采用直接安装方式（DM选项）
低液位报警采用3线制输出信号(可用常开或常闭)
较LM2000系列有更大的玻璃视窗
视窗采用内部密封较之前的边缘密封可靠
简单的安装方式
全长度的高度调整插槽
可选ATEX防爆认证
不锈钢浮球
连接口规格
3个连接口都是 3/4 NPTF
更大的蛙眼视窗
方便检查的绿色条带
Crankcase Balance Vent Connection: 1/2 NPTF (top).
Inlet Connection: 1/2 NPTF removable screen (side).
Outlet Connection:
2 x 3/4 NPTF (side)
1 x 3/4 NPTF (bottom)
Thumb-Valve? Material: Viton.
Snap-switch: SPDT rating 10 A, 125 VAC; 0.5 A, 125 VDC; 10 A, 30 VDC.
Wire leads: 18 AWG x 14 in. ± 2 in. (355 mm) length.
Conduit Connection: 1/2 inch conduit (female, top).
Case: Die cast aluminum
Lens: Clear “Frog Eye” non-staining, high impact, high temperature polycarbonate; UV and heat stabilized.
Dial: High visibility white background with solid green band for normal level indication.
Maximum Inlet Pressure: 9.50 psi/25 ft. oil (head pressure).
Maximum Case Pressure: 15 psi (103 kPa).
Maximum Differential: 2 in. (51 mm) between running and stopped.
Maximum Ambient Temperature: 250°F (121°C).
Float: 304 Stainless Steel
Flow Rates: Refer to LM500 Series Flow Rates chart for application data.
Dimensions: Overall 6-9/16 inch tall x 6-3/16 inch deep x 3-1/2 deep.
For exact dimensions, refer to document “00-02-0729 LM500 Installation Instructions”.
LM500/LM500-TF Shipping Dimensions: 9.5 (W) x 7.5 (D) x 11 in. (H) (241.3 (W) x 190 (D) x 279.4 mm (H)).
LM500/LM500-TF Shipping Weight: 3 lbs. 13.44 oz (1.74 kg)
LM500, LM500TF
Oil level maintainer with sightglass, low level snap-switch and test facility.
Murphy LM500 Level Maintainers
Murphy LM500 Series Level Maintainer
The Murphy LM500 Series maintains the crankcase oil level of an engine, pump or compressor. Adjusted to the correct running-oil-level, it will replenish oil as it is used.
LM500 (15700835)LEVEL MAINTAINER
LM500-TF-KP (15700855) LEVEL MAINTAINER (TEST FEATURE)
LM500-TF-PM (15700843) LEVEL MAINTAINER (TEST FEATURE, PIPE MOUNT)
LM500-UB (15700842) LEVEL MAINTAINER (UNIVERSAL BRACKET)
LM500-PM (15700841) LEVEL MAINTAINER (PIPE MOUNT)
LM500-TF (15700836) LEVEL MAINTAINER (TEST FEATURE)
LM500-TF-UB (15700844) LEVEL MAINTAINER (TEST FEATURE, UNIVERSAL BRACKET)
LM500-TF Oil Level Maintainer with Test Feature 15700836
LM500 (15700835) LEVEL MAINTAINER
LM500-PM (15700841) LEVEL MAINTAINER (PIPE MOUNT)
LM500-TF ATEX (15700837) LEVEL MAINTAINER (TEST FEATURE, ATEX CERTIFIED)
LM500-TF-KP (15700855) LEVEL MAINTAINER (TEST FEATURE)
LM500-TF-PM (15700843) LEVEL MAINTAINER (TEST FEATURE, PIPE MOUNT)
LM500-TF (15700836) LEVEL MAINTAINER (TEST FEATURE)
LM500-TF-UB (15700844) LEVEL MAINTAINER (TEST FEATURE, UNIVERSAL BRACKET)
LM500-UB (15700842) LEVEL MAINTAINER (UNIVERSAL BRACKET)
- 如何订货 how to order
Model/Part Number |
Description |
Notes |
| LM500 |
Lube Level Maintainer |
|
| LM500-TF |
Lube Level Maintainer w/ Test Feature |
|
| 15000954 |
Vent Fittings Kit |
one tubing vent; one 1/4 x 1/2 NPT connector |
| 15000355 |
Hose Kit |
one - 1/2 in. (13 mm) I.D. x 3 ft. (914 mm) hose; one - 1 in. (25 mm) I.D. x 3 ft. (914 mm) hose; two - 1/2 in. (13 mm) worm gear clamp; two - 1 in. (25 mm) worm gear clamp; two - 1/2 NPT x 1/2 in. (13 mm) barbed fitting; two - 3/4 NPT x 1 in. (25 mm) barbed fitting |
| 89080801 |
1/2 NPT x 1/2 in. Hose Barbed Fitting |
|
| 89081001 |
3/4 NPT x 1 in. Hose Barbed Fitting |
|
| 15000518 |
Pipe Bracket Kit |
|
| 15000519 |
Universal Flange Kit |
|
| 15000532 |
Bubble Lens Kit |
|
| 15000943 |
Fittings Kit |
one tubing vent; one hose barb, 1/2 NPT to 1/2 Hose; one hose barb, 1” ID hose x 3/4 NPT; one connector, 1/4 x 1/2 NPT |
Compliance Documents / Certificates
- CE Declaration of Conformity
 LM500和LM500-TF型号油位维持计 自动补油器实物现货照片
|
